Specifically designed to work on 07-18 chevy/gmc 1500 trucks with our underbed notch kit

The upper bracket welds to the outside of the underbed notch, the lower brackets bolt in-between the flip kit and leaf springs. Kit includes a set of upper and lower brackets, firestone sleeve bags, 15’ 1/4” air line, fittings / shrader valve, and grade 8 hardware / washers

CNC plasma cut from 3/16” P&O steel

CNC plasma cut from 3/16” P&O steel

Designed to match the contours of the frame for a clean and easy install.

Our signature Trick’d Toys press-broken edges for a cleaner, stronger, and more uniform fit and finish.

All of our notch kits are a boxed design, with identical OR ticker material than your stock frame rail, adding more strength and clearance over any bolt-in notch kit on the market!

Tall enough to lay frame up to a 26” wheel if on air ride!

Our plate monster notches are extremely DIY friendly. Their self-centering design takes out all the guess work for the installer!

Comes with both side notches pre-formed and welded, X2 1.25” crossbars and upper shock relocation tabs.

** DOES NOT FIT 2500 or 3500 TRUCKS **

NOTE: THESE ARE BUILD TO ORDER AND CAN TAKE 7-10 BUSINESS DAYS BEFORE THEY SHIP FROM DAY ORDERED

Info coming soon.

Info Coming Soon

Info coming soon.

Our watts link is specifically designed for 88-98 Chevy/GMC 1500, 2500, 3500 trucks.

CNC plasma cut 1/4” P&O steel, 1.25” O.D x .120 wall DOM, grade 8 hardware, all mounting holes are punched for a perfect fit.

Specifically designed to work best with our 19-24 Chevy/GMC 1500 underbed notch kit.

The upper bracket welds to the outside of the frame notch, lower bracket bolts in-between flip kit and leaf springs. Kit includes upper bracket and lower bag brackets, firestone sleeve bags, 15’ 1/4” air line, fittings and shrader valve, and grade 8 hardware and washers.

CNC plasma cut from 3/16” P&O Steel

Cut from 2x4 rectangle 3/16” thick tubing.

Designed to fit the contours of the frame for a clean and easy install.

Our tube notch gives clearance to lay-frame on a 24” wheel if on air ride!

Includes X2 1.25” crossbars.

Notches sold in pairs.

** DOES NOT FIT 2500 or 3500 TRUCKS **

NOTE: Please allow 7-10 days to ship as these are built to order.

Cut from 3x3 square 3/16” thick tubing.

Designed to match the contours of the frame for a clean and easy install.

Our notch allows clearance to lay frame on up to a 26” wheel if on air ride!

Includes X2 1.25” crossbars.

Notches sold in pairs.

** DOES NOT FIT 2500 or 3500 TRUCKS **

NOTE: Please allow 7-10 days to ship as these are built to order.

Cut from 3x3 square 3/16” thick tubing.

Designed to match the contours of the frame for a clean and easy install.

Our tube notch allows clearance to lay frame on up to a 26” wheel if on air ride!

Includes X2 1.25” crossbars and upper shock relocation tabs.

Notches sold in pairs.

** DOES NOT FIT 2500 or 3500 TRUCKS **

NOTE: Please allow 7-10 days to ship as these are built to order.

This driveshaft crossmember notch is designed to notch the rear gas tank crossmember and not lose strength.

Works on 88-98 Chevy/GMC regular cab, ext. cab, and crew cab trucks.

Specifically designed to work best with any of our underbed notch kits we offer, and stay under the stock bed floor. This kit works best with and been tested on 88-98, 99-06, 07-18 Chevy/GMC 1500 with 4”, 5” rear drop. If you are lower than 5” we recommend our offset style helper bag kit

This kit welds inside the frame directly over axle and includes upper and lower bag brackets, firestone sleeve bags, 15’ 1/4” air line, fittings and shrader valve, and grade 8 hardware and washers.

OBS Dually plate monster notch kit is CNC plasma cut and formed from 1/4” P&O steel.

Overbuilt, thick material, and heavy duty!

Designed to match the contours of the frame for a clean and easy install.

Our signature Trick’d Toys press-broken edges for a cleaner, stronger, and more uniform fit and finish.

Compatible with 3/4 and 1-ton ‘90 to ‘00 GM pickups.

** Please allow 7 to 10 business days for production. **

Cut and formed from 3/16" P&O steel designed to match the contours of your frame for clean and easy install.

Our signature Trick’d Toys press-broken edges for a cleaner, stronger, and more uniform fit and finish.

All of our notch kits are a boxed design, with identical OR ticker material than your stock frame rail, adding more strength and clearance over any bolt-in notch kit on the market!

Our under-bed notches are good for up to an 8” rear drop.

Trimming of the bed support under your bed floor is required for clearance.

Sold in pairs.

** DOES NOT FIT C20 or C30 TRUCKS **

** Please allow 3 to 5 business days for production **

CNC cut and formed from 3/16" P&O steel designed to match the contours of your frame for clean and easy install.

Our signature Trick’d Toys press-broken edges for a cleaner, stronger, and more uniform fit and finish.

All of our notch kits are a boxed design, with identical OR ticker material than your stock frame rail, adding more strength and clearance over any bolt-in notch kit on the market!

Our under-bed notches are good for up to an 8” rear drop.

Trimming of the bed support under your bed floor is required for clearance.

Sold in pairs.

** DOES NOT FIT 2500 or 3500 TRUCKS **

** Please allow 1 to 3 business days for production. **

If you're putting a Ford E-Series bumper on the back of your OBS truck, you may be wondering where you're going to mount your license plate...

Precision cut from 16-gauge steel, this box is contoured to fit the Ford bumper and mounts with four low-profile stainless bolts for a clean look.  Mounting hardware and a license plate light are included.  Ships in raw steel finish- paint or powder coat this thing before you hit the road!

Check out the video install on Youtube.
OBS Chevy Custom Rear Bumper Installation - with Trick’d Toys